• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 269 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/TIDM-1000: three-phase Vienna：vBusPM feedback value

CCS/TIDM-1000: three-phase Vienna:epwm Regs and ADC Regs

Libra_V
Intellectual 515 points

Part Number: TIDM-1000

Tool/software: Code Composer Studio

I would like to ask, in the three-phase Vienna procedure, I have not found the corresponding programabout EPWM.Regs and ADC.Regs. I hope you can point it out to me and look forward to your reply

  • 0
    TI__Genius 16085 points

    Hi,

    Not sure if I understand your question correctly. If you are looking for the PWM and ADC settings, you could refer to VIENNA_HAL_setupPWM and VIENNA_HAL_setupADC. These are driverlib based functions which setup the register bits inside.

    Regards,

    Chen