F28M35M22C: G3 FCC PHY source code for F28M35 MCU & AFE032 combination

This time, I was able to access the shared resources. But, I couldn't find the G3 FCC or G3 ARINC PHY project example(source code).

Only host side app, PCB design,docs and firmware .out files found in the shared resource. Can we get the CCs G3 FCC or G3 ARINC PHY project for F28M35 and AFE032 combination?

Bibin,

I'll look into this afternoon, and make sure the correct contents are download locations you have access to.

Best,

Matthew

Pls see

Bibin,

I just granted you access to the FCC based libs, that should have the AFE032 interfaces for the service node.

Matt

While clicking the link in mysecuresoftware, the following error is coming:

  Kindly rectify the issue.

Bibin,

Can you confirm when you go to the link in the approval email you see something like the below(with all your approved downloads)?  Once you click on the FCC Download you should be given 2 file choices, SDK/DDK; clicking on either will begin the download.  I did get a warning that the downloads were unsecure, but I could click through that and download.

Best,
Matthew

Today, I was able to download both DDK & SDK.

But it contain a project for the F2837x and AFE032 combination. Will it work for the F28M35x and AFE032 combination?

Is there any different project for the later?

Bibin,

I need to see what version supports the F28M35 + AFE032.  Per my understanding this was developed to support the ARIB band, vs FCC, hence why the package we have for F28M35 only needs the AFE031.  I believe that in terms of setup the AFE031/032 are similar, with the only difference being that the AFE032 supports a wider frequency band.

Matt

Bibin,

I am not finding a package we have for F28M35 + AFE032.  I think the comms API that is in the FCC package should work with the F28M35 to talk to the AFE032.

Best,

Matthew