CCS/C2000WARE: #6001 cannot open file "~" Permission denied.

Hi Shunji,

I just tried on my setup, and I am able to build the example properly without any error.

Can you check if you have this folder?

C:/ti/C2000Ware_3_02_00_00_Software/driverlib/f2837xd/driverlib

Thank you for replying, Santosh.

I checked that folder C:/ti/C2000Ware_3_02_00_00_Software/driverlib/f2837xd/driverlib, and I think I have this folder properly.

I put the screenshots of that folder.

Is that OK?

Best regards.

Shunji Kohno

Shunji,

Did you just import the project (C:/ti/c2000/C2000Ware_3_02_00_00/driverlib/f2837xd/examples/cpu1/emif/) or made any changes in the project?

Can you send screen-shot of project explorer?

I imported  (C:/ti/c2000/C2000Ware_3_02_00_00/driverlib/f2837xd/examples/cpu1/emif/)  and made change a little.

My purpose is using the "rts2800_fpu32_fast_supplement" and "sin_f32" in the "emif_ex1_16bit_asram" project.

This is the Project Explorer screenshots.

Should I show you more details?

Best regards.

Thank you for taking care.

-Shunji

Shunji,

Can you right-click driverlib.lib and check the physical path in property? Does that file exist at that location?

Santosh,

I put the screenshots concerned with "driverlib.lib", path information and folder.

Excuse me for a lot of pictures.

Is that something wrong points?

Best regards.

-Shunji

Santosh,

Thank you for your advice.

I did it from the beginning and succeeded.

This problem may be caused by confusing  C2000ware 3.02.00.00 and 3.03.00.00.

Thank you very much, Santosh.

-Shunji