Other Parts Discussed in Thread: SPRC074,
Hi TI expert
According to https://www.ti.com/tool/FTLF240X#supportandcommunity
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Hareesh
According to https://www.ti.com/tool/FTLF240X#supportandcommunity
It cannot order now. How can I order it ?
Best regards
Thomas
Thomas,
Most of the tools that page refers to are obsolete and hence not available for download. The two posts below provide helpful references:
https://e2e.ti.com/support/microcontrollers/c2000/f/171/p/925143/3418094#3418094
https://e2e.ti.com/support/microcontrollers/other/f/908/t/815667
Hi Hareesh
If the tools are obsolete, do you have alternative tools?
Best regards,
Thomas
If programming via JTAG is not an option, Serial Programming solutions are available from 3rd parties:
Hi Hareesh
Thank you for your replying. Further questions:
1.For JTAG interface, only C2Prog + XDS emulator could work? Other tools looks obsolete...
2.C2Prog can only work with the boot loader inside the IC as user manual (www.codeskin.com/programmer)mentioned.
Do all TMS320 ICs from TI are shipped with primary boot loader embedded to support JTAG programming?
Best regards,
Thomas
1.For JTAG interface, only C2Prog + XDS emulator could work? Other tools looks obsolete
Sorry, the question is not clear.
2.C2Prog can only work with the boot loader inside the IC as user manual (www.codeskin.com/programmer)mentioned.Do all TMS320 ICs from TI are shipped with primary boot loader embedded to support JTAG programming?
You are mixing two different things. To program the device via JTAG, the bootloader embedded in the on-chip boot-ROM is not needed. It is only needed when you want to program the device through the SCI (serial) port. Yes, the boot-ROM (and the embedded boot-loader) is part of all devices shipped.
Hi Hareesh
Question 1:
It looks the programming tool on JTAG from TI (FTLF240X & SPRC074) are both obsolete. The only tool I can
find is C2Prg (www.codeskin.com/programmer) +XDS emulator. Any other JTAG programming tool is
available? It is better this tool could work with CCS & Win 10.
Best regards,
Thomas