• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 755 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28065: 3 phase PFC

Ravi H
Expert 1475 points

Part Number: TMS320F28065

Hello,

Wanted to know is there a code example for 3 phase PFC, as the description given below:

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/171/TI_5F00_3phasePFCandAPFapplicationwithTIC2000MCU.pdf

Had some doubts in dq ordinate modeling given in page no. 18/50.

Also wanted to know controlling for an unbalance load.

Please guide

  • 0
    TI__Genius 16085 points

    Hi Ravi,

    We don't have a released software for that. 

    Had some doubts in dq ordinate modeling given in page no. 18/50.

    [Chen] What are your doubts? any details?

    Also wanted to know controlling for an unbalance load.

    [Chen] I don't quite get your question. The output will be a DC load. Are you asking about unbalanced three phase input?

    Regards,

    Chen

  • 0 in reply to Chen Jiang ti
    Expert 1475 points

    Sir,

    We are building a system were: APF will be used to correct, power factor of the source. The load can be unbalance reactive or harmonic. Due to which the current at source can be unbalanced.

    doubt 1. dq ordinate modeling given in page no. 18/50: I had worked on simulation where the changes from that model were:

    This control logic isn't working if I create unbalance current in source or load. The correction waveform becomes non-sinusoidal.

    Wanted to know if you can help me on this, as we are building this system with TI-CPU.