Compiler/TMS320F28379D: 28379D_Lanchpad download HEX file

user6346729

Prodigy 160 points

Part Number: TMS320F28379D
Other Parts Discussed in Thread: UNIFLASH

Tool/software: TI C/C++ Compiler

I found no response when I burned the HEX file in the 28379D_Lanchpad development board.

I used the Example_29379D_launchPad routine in C2000.

Use UniFlash to download the HEX file.

You can rule out hardware problems because I successfully downloaded the OUT file from the flash_programming_cPU01 routine and ran it successfully

over 4 years ago

0 Vamsi Gudivada over 4 years ago

TI__Guru* 87105 points

Hi,

Please provide below details:

1. Please enable verbose output available at the bottom of the On-chip flash plugin GUI (CCS debug view -> Tools -> On-chip flash) and try the flash load. Send the console window output.

2. After load, did you check the flash memory and check whether content is programmed or not?

3. Please check whether you are using the flash build configuration or not (https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/878674)

Thanks and regards,

Vamsi

0 Vamsi Gudivada over 4 years ago in reply to Vamsi Gudivada

TI__Guru* 87105 points

Hi,

I did not hear back from you. Do you have any update on this? Can I close this post?

Thanks and regards,

Vamsi

0 Vamsi Gudivada over 4 years ago in reply to Vamsi Gudivada

TI__Guru* 87105 points

Hi,

Thank you for confirming (by verifying the answer) that I can close this post.

Thanks and regards,
Vamsi

0 user6346729 over 3 years ago in reply to Vamsi Gudivada

Prodigy 160 points

thanks,

C2000™︎ microcontrollers

C2000 microcontrollers forum

Compiler/TMS320F28379D: 28379D_Lanchpad download HEX file