• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 82 subscribers
  • Views 319 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28379D: Generate ECC during the link step

TMS320F28379D: ECC data is not output during the link step

Sh.Sasaki
Guru 13625 points

Part Number: TMS320F28379D

Hi,

I 'd like to output ECC data during the link step, but I couldn't.

I created the .out and .map by the method described in No.39 of the link below.

e2e.ti.com/.../951658

The project .text is placed in FLASHB as shown in the figure below, but no data is output to FLASH_B_ECC.

Due to the above, when I uncheck "Auto ECC generation" in CCS and load the program into FLASH, ECC data is not written.

Attach the linker command file and map file.

Please tell me the settings required to generate ECC data at build time.

cmd_file.txt

0028.map_file.txt

Best regatds,
Sasaki