• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 80 subscribers
  • Views 371 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR2111: MSP430FR2111 burning tool confirmation

Ken Chen39
Intellectual 545 points

Part Number: MSP430FR2111
Other Parts Discussed in Thread: MSP-FET

Hi TI Team,

At present, we have seen two burning tools on the official website corresponding to this model.

We do not know which one is more suitable for production batch burning? Please help to confirm it,Thank you!

  • 0
    Guru 34983 points

    From TI there is MSP-FET for debugging and MSP-GANG for production. If you are looking production tool and Windows only GUI or standalone is enough for you, than MSP-GANG should be fine. What interface is on your board, SBW or JTAG and what is external capacitor / resistor combination on RESET pin, and VCC?

    BTW any master device (any TI LP) should work fine with FRAM target and fast enough, because there is no flash erase and writing (burring).

**Attention** This is a public forum