MSP430f5529 launchpad to control TPS650860evm

ali biçer

Other Parts Discussed in Thread: MSP430F5529, TPS650860EVM-116

hi, i have msp430f5529 launchpad and tps650860evm-116. I want to connect them via I2C. master msp430f5529 launchpad and slave tps650860evm-116. I want to change voltage of tps650860 . I use code composer studıo. can you help me?

over 4 years ago

0 Daniel W over 4 years ago

TI__Genius 13216 points

Hi Ali,

I would recommend starting with the user's guide for the TPS650860 in I2C systems https://www.ti.com/lit/pdf/swcu186

Additionally, the register map included in section 5.9 of the datasheet should be helpful https://www.ti.com/lit/gpn/tps65086

Also, the IP-GUI tool can be helpful for I2C control of the TPS650860 https://www.ti.com/tool/IPG-UI

Thanks,

Daniel W

0 Joe G. over 4 years ago

TI__Mastermind 26031 points

FYI, here is an example of an MSP I2C master connection to a TI device (BQ) that might help from an MSP standpoint:

training.ti.com/rapid-proto-fund-i2c-smbus

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430f5529 launchpad to control TPS650860evm