This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR5969: Install TI-RTOS in CCSv10?

Part Number: MSP430FR5969


Hi there,

I've been trying to figure out how to install TI-RTOS (2.20) into my CCS v10 installation.

All the documentation I've found, states it should be easy peasy - open the Resource Explorer and select TI-RTOS. But no, I only get the following two options:

Then I fetched the TI-RTOS installer and hoped it would either add automatically to my CCS installation, or that I could find something inside about how to, but no.

(https://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/tirtos/2_20_00_06/exports/tirtos_msp43x_setupwin32_2_20_00_06.exe?tracked=1)

So my question is: Is it possible to get TI-RTOS (for my MS430FR5969) integration into CCS v10? (and if "yes", how? :))

BR,

Martin

  • Hi Martin, 

    If you have it installed see if you can find and add it to your path (Include Options), this should help CCS find it. I will look into this further when I am able to if that doesn't help you.

    Regards,

    Luke

  • Hi Luke,

    Thanks for the response. I'm not sure your definition of "path" and "Include Options" is the same as what was required, but nevertheless it made me look around, and I found that the "Product discovery path" (Preferences > Code Composer Studio > Products) was not including the path to where I installed the TI-RTOS (because I installed CCS in a non-default location, but TI-RTOS in its default one).

    So now I'm happy and can generate TI-RTOS examples Thumbsup

    Thanks,
    Martin

**Attention** This is a public forum