• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 201 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6043: msp430fr6043

A A8
Prodigy 105 points
Part Number: MSP430FR6043

Hi,

I am unable to understand the capture duration parameter from USS Design centre. I have a application in which my receive pulse will arrive in approximately 200us and it can maximum be upto 400 us while testing. I am setting the ADC Capture to 100 and Capture duration to 400 is it correct? Can somebody please guide me.

Thanks,

Aishwarya

  • +1
    TI__Genius 12615 points

    Hi Aishwarya,

    Yes, you should be able to see your signal with this ADC start capture time and capture duration.  The ADC start capture time is based on start of excitation of the other transducer that will send the ultrasonic pulses.

    BR,

    Leo

**Attention** This is a public forum