Issue: Failed to read data from 0x0f00 bit
According to the manual, enter the BLS state, send 80 to the monolithic, and receive 90 responses normally. Sending 80 14 04 04 00 0F 0E 00 75 E0 again returns a 0xA0 answer and does not return data correctly.
Could you please help to check this case?
Thanks!
Best Regards,
Cherry
Hi,
Thanks for your reply and the detailed document info is as follows:
The document is slau319ae:
Looking forward to your reply!
Best Regards,
Cherry
Hi Cherry
Thanks for your feedback!
0xA0 (1010 0000) is received abnormally while 0x90 (1001 0000) should be received.
I think you can consider check the UART setting firstly:
Please check the baud rate and PLL locked on system clock.
**Attention** This is a public forum
