Where is the application Note "Starting a USB design with MSP430 MCU?

Co Tang

Other Parts Discussed in Thread: MSP430F5529

I can't find that anywhere. I search the TI site but I still can't find it. It constantly being reference in the Programmer Guide for MSP430_SUB_API. Can anyone send me a link to that Starting guide.\

Thanks.

over 15 years ago

0 Tsuneo Chinzei over 15 years ago

Genius 4680 points

This document was included in this kit,

MSP430F5529 USB Sample Kit - Getting Started and Support Files

http://www.ti.com/jp/litv/zip/slac293a

But TI had dropped this link, maybe last year.

The contents of this kit was preliminary, and most of them are updated and covered with other documents.

For your reference, I attached one I have.

Tsuneo

Starting a USB Design Using MSP430 MCUs.zip

0 Joerg Quinten over 15 years ago in reply to Tsuneo Chinzei

Guru 17650 points

Hi,

I highly recommend to use the MSP430 USB Developers Package instead since it is the current release. Find it here http://focus.ti.com/docs/toolsw/folders/print/msp430usbdevpack.html

Rgds
aBUGSworstnightmare

0 Tsuneo Chinzei over 15 years ago in reply to Joerg Quinten

Genius 4680 points

aBUGSworstnightmare

The problem is, the TI document in the new package (you've recommended) still refers to the old document (attached one), which had been already withdrawn from TI site. I believe the OP has downloaded the new package. So, he asked this question.

Tsueno

0 Co Tang over 15 years ago in reply to Tsuneo Chinzei

Prodigy 60 points

That is correct. I did download the latest package and yet it kept referring back to this old document.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

Where is the application Note "Starting a USB design with MSP430 MCU?