MSP430G2210: Programming/debugging MSP430G2210 using LAUNCHXL-CC2650 development board.

Pritesh Metha

Part Number: MSP430G2210
Other Parts Discussed in Thread: LAUNCHXL-CC2650, , MSP430F5528, MSP-EXP430G2ET

Hi,

Can we use LAUNCHXL-CC2650 on board programmer to external MSP430G2210 chip for debugging /flashing purpose.

0 zrno soli over 3 years ago

Guru 34453 points

No. All TI FET's for msp430 targets are based on MSP430 devices. LAUNCHXL-CC2650 JTAG master is XDS110.

G2210 by SBW can be debugged/flashed by any TI LP with eZ-FET (msp430f5528)

0 Pritesh Metha over 3 years ago in reply to zrno soli

Hi zmo soli,

Thanks for your timely response.

Can we use MSP-EXP430G2ET - Launchpad to program/flash/debug external MSP430G2210 chip ?

0 Brandon Fisher94 over 3 years ago in reply to Pritesh Metha

Hi Pritesh,

Yes you can. This launchpad also has the EZ-FET emulator that Zrno mentioned.

Best Regards,
Brandon Fisher

**Attention** This is a public forum

MSP low-power microcontroller forum