• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 640 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EVM430-FR6043: ERROR DToF - Shift value was greater than maxSampleShift

atharav karandikar
Prodigy 10 points
Part Number: EVM430-FR6043


GETTING ERROR "DToF - Shift value was greater than maxSampleShift" after connecting the controller in USS GUI and loading the config file from examples C:\Users\HP\USS_02_30_00_03\USSWorkspace\USS_Project\config\USSConfig.xml  (the error starts after connection) i have connected 500khz transducers to the  controller

.

  • 0
    TI__Genius 16070 points

    Hi Atharav,

    Is this zero flow testing, or is there flow through the pipe?

    Can you post pictures of your configuration parameters and your ADC capture?

    maxSampleShift is a parameter that generally only needs to be adjusted for high flow, so if you do not have flow in the pipe and you are getting this then I believe that the device is not able to calculate DToF correctly.

**Attention** This is a public forum