MSP430F415: About the MSP430F415IPMR chip，How do I read the hex file of the chip via USB burner

Hi lxy

Please check uniflash quick start guide on: https://software-dl.ti.com/ccs/esd/uniflash/docs/v5_0/quick_start_guide/uniflash_quick_start_guide.html

Please check 4.3 Debuggers and Programmers chaptor on MSP430 MCUs Development Guide Book (Rev. A) as the reference

Thanks!

Hello Xiaodong LI,

Thank you for your reply。We tried to use Uniflash to export hex file, but it was indicated that the chip could not be identified. Could you please provide detailed operation steps?thanks a lot。

Hi Ixy

MSP-FET430UIF: It is a previous generation of MSP-FET, which isn’t available anymore on TI.com.    

I can't find the manual of this FET debugger.

May I know if customer has other FET on hand. for example: MSP-FET?

If there is no more FET or msp430 launchpad on hand.

I will recommend user installs the CCS https://www.ti.com/tool/CCSTUDIO and try if CCS can identify the MSP-FET430UIF and the target MCU MSP430F415

Thanks