MSP430FR60431: solution pls

Raja Ramya

Part Number: MSP430FR60431

Hello forum,

i need a perfect adc capture pls help me make it proper ...in where i have to change in parameters hence i m using PSC500K018060H2AD2-BI ,its frequency is 500hz...

here i have uploaded adc capture images with their parameters ...kindly check and reply asap...

4 months ago

0 Raja Ramya 4 months ago

Prodigy 205 points

Since i have another doubt as here i m using 500hz ,fi and f2 range is used below 200kz its right or wrong

0 Cash Hao11 4 months ago in reply to Raja Ramya

TI__Mastermind 32145 points

Hi,

If you are using 500kHz transducer, it is recommended to set F1 to 440 and F2 to 442 for 500kHz Transducers.

And UPS0 to UPS1 gap is recommend to 500 or 1000.

Signal sampling frequency is recommend for 2000.

If you are using the frequency mode, you need to set the F1 to 170k and F2 = F1+2kHz first.

You can refer to this academy for the parameter tuning. https://dev.ti.com/tirex/explore/node?node=A__AURAjHTDa0oVdd-2UTgIEQ__MSP430-ACADEMY__8HaEUeq__LATEST

Best regards,

Cash Hao

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR60431: solution pls