MSP430FR2355: [ERROR] MSP430: Error initializing flash programming: Failed to load C:\ti\deskdb\content\TICloudAgent\win\ccs_base\DebugServer\bin\FlashMSPSLBootloader.dll: The specified module could not be found.

Nick Pummell

Part Number: MSP430FR2355
Other Parts Discussed in Thread: UNIFLASH

Hi there,

We keep getting this issue with Uniflash not finding the DLL for this file even though it is there!?

We have tried everything to sort including deleting the programme and reinstalling but nothing seems to work. We are using the Olimex MSP430-BSL rocket board.

Thanks in advance for any assistance!

Kind Regards

Nick

12 months ago

0 Dennis Lehman 12 months ago

TI__Guru 68141 points

Hi Nick,

If you check the path described above, to you find the .dll file? What version of Uniflash are you using?

I have 8.60 and the path to my .dlls are -> C:\ti\uniflash_8.6.0\deskdb\content\TICloudAgent\win\ccs_base\DebugServer\bin

0 Nick Pummell 12 months ago in reply to Dennis Lehman

Prodigy 20 points

Hi Dennis,

Thanks for the help.

I have the same path and the .dll file is there the same as yours. I am also using 8.60.

I have since reverted back to 7.2.0 and this works fine!?

Thanks

Nick

0 Dennis Lehman 12 months ago in reply to Nick Pummell

TI__Guru 68141 points

Thanks Nick for the feedback on this. Ok - you are good for now using 7.2.0. I will run this by our Uniflash team for further advice.

0 Ki 12 months ago in reply to Nick Pummell

TI__Guru**** 450941 points

Hi Nick,

What version of Windows are you using?

Thanks

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2355: [ERROR] MSP430: Error initializing flash programming: Failed to load C:\ti\deskdb\content\TICloudAgent\win\ccs_base\DebugServer\bin\FlashMSPSLBootloader.dll: The specified module could not be found.