Other Parts Discussed in Thread: IO-EXPANDER-EVM,
Hello,
I am currently trying to setup my MSP-EXP430G2ET EVM that I just recently got, with the IO-EXPANDER-EVM. I was following the instructions on how to get them to interact and after having set the jumpers on the MSP to what I believe is the right orientation I tried to run the IO Expander Flash where I received the following error:
As for the jumpers I had altered on the MSP430 it was the RXD and TXD of P1.3 and the P1.6 J7 jumper.
I had also flashed the MSP430 with the latest firmware.
See the board below:
Let me know if you need any further information regarding this issue.
Thank you for the support