MSP430I2041: FET-Pro430 + MSP-FET

Koichiro Tashiro

Part Number: MSP430I2041
Other Parts Discussed in Thread: MSP-FET, , UNIFLASH

My customer wants to load image to MSP430i2041 using MSP-FET and FET-Pro430(ver. 3.4-1).
But it failed at verify process.
If they use UniFlash (v.8.1.1), verify is OK, but it does not support checksum.

I thought FET-Pro430 can be used with MSP430i2041.
Any suggestion to check?

Thanks and regards,
Koichiro Tashiro

4 months ago

0 Eason Zhou 4 months ago

TI__Mastermind 36270 points

What error it comes out? It should support i204x

0 Koichiro Tashiro 4 months ago in reply to Eason Zhou

TI__Mastermind 21850 points

Hi Eason,

Please find below screen captures.
1) Memory options.

2) Connect options.

3) Before programming.

4) After programming with error.

Thanks and regards,
Koichiro Tashiro