MSP430FR2433: eCOMP usage

Ítalo Moraes

Part Number: MSP430FR2433

Tool/software:

Tool: CCS Studio 12.7

Hello everyone!

Is there a way to use the eCOMP module on MSP430FR2433? I checked the board's header in the IDE; the registers are not present.

I saw that the registers are present on FR2311, so could I just copy and paste to my project?

0 Bruce McKenney over 1 year ago

Guru 100705 points

As near as I can tell from the datasheet (SLASE59D), notably Fig 1-1, the FR2433 doesn't have an eCOMP module.

The ADC has a window comparator, which isn't really the same thing but maybe you can press it into service anyway.

0 Ítalo Moraes over 1 year ago in reply to Bruce McKenney

Hi!

I saw here that this board has no comparator channel. I'll take a look at the ADC. Thanks.

+1 Xiaodong LI over 1 year ago

Hi Ítalo Moraes

Please check the production page of MSP430FR2433: https://www.ti.com/product/MSP430FR2433

There is no eCOMP on MSP430FR2433

Thanks

**Attention** This is a public forum

MSP low-power microcontroller forum