MSP430FR5043: Remote configuration of MSP430 device over UART interface

Bivin George

Expert 1057 points

Part Number: MSP430FR5043
Other Parts Discussed in Thread: MSP-FET, UNIFLASH

Tool/software:

Is it possible to update firmware of MSP430FR5043 using UART interface.

If so, is any hardware modification required for the same. Share user manuals related to the same.

Regards

Bivin

over 1 year ago

0 Gary Gao over 1 year ago

TI__Mastermind 39840 points

Yes, it can. Please refer to this document https://www.ti.com/lit/ug/slau550ab/slau550ab.pdf

More other resource please refer to https://www.ti.com/tool/MSPBSL

0 Bivin George over 1 year ago in reply to Gary Gao

Expert 1057 points

Can you share reference schematic on how the hardware connection to be done for implementing MSP430 configuration over UART for MSP430FR5043 device ?

Can i use MSP-FET for programming the same over UART ?

Share reference manuals & details of related softwares to implement the same.

Thanks in advance.

Regards

Bivin

0 Gary Gao over 1 year ago in reply to Bivin George

TI__Mastermind 39840 points

If you want to use MSP-FET and PC to do the firmware update with BSL you can follow the guide below if you use BSL scripter84583.Download_image_BSL.pdf

Or can also use Uniflash to do that the hardware connection are the same.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5043: Remote configuration of MSP430 device over UART interface