This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
HELLO EVERY ONE
1. we are use two MSP430F6638 AND WE would like to use both side communicate using USB2.0 IS IT POSSIBLE ANY WAY.
2. IF no than anywhere you mentioned it in manual or data sheet please provite the document.
So you want to make two F6638 communicate on USB?
No F6638 only supports to work as slave. And it did not support the feature of OTG.
I already give him the same answer but he repeating the identical question every day.
**Attention** This is a public forum