MSP430FR2475: Firmware upgrade via UART interface without using FET

nitish kareliya

Part Number: MSP430FR2475
Other Parts Discussed in Thread: MSP-FET

Tool/software:

Hello Team,

In one of the projects of MSP430FR-2475, there is a requirement to upgrade the MCU firmware using UART interface without MSP-FET debugger/programmer. Can you please guide thoroughly how to implement this?

1 month ago

0 yan R 1 month ago

Prodigy 50 points

HI nitish
In M0G3507, can refer BSL examples such as "bsl_software_invoke_app_demo_uart", or use the flash API to write your own firmware update program (IAP).
I'm not sure if this information will help you or not.

0 Xiaodong LI 1 month ago

TI__Mastermind 22425 points

Hi nitish

Please check MSP430 FRAM device BSL solution on: MSP430 FRAM Devices Bootloader (BSL) User's Guide (Rev. AB)

application notes Launchpad-Based MSP430 UART BSL Interface (Rev. A) is the reference as well

Thanks

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2475: Firmware upgrade via UART interface without using FET