• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 201 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6043: what is Booster Pack in EVM430-FR6043?

sunwoo han
Prodigy 100 points
Part Number: MSP430FR6043
Other Parts Discussed in Thread: EVM430-FR6043

Tool/software:

Hello!

I'm designing a custom FR5043 board based on the EVM430-FR6043

I'm just wondering What is the Booster Pack section of the EVM430-FR6043 schematic

Can it be removed if it's not necessary?

I hope you have a great holiday.

  • 0
    TI__Mastermind 19787 points

    Hi, 

    TI's Booster Pack is:

    A BoosterPack is essentially a standardized add-on module:
Standardized Connector: It uses a 20-pin or 40-pin header that 
matches the LaunchPad's pins, allowing for easy plug-and-play functionality.
Functionality Expansion: Each BoosterPack provides specific capabilities 
or functionalities which can be added to the LaunchPad without soldering or 
complex wiring.

    You can keep some function that you need by using a smaller header pin.

    Or if these functions are not needed from your design, you can remove it.

    And actually, booster pack is mainly for development, not suitable for a final product.

    Regards,

    Helic

**Attention** This is a public forum