• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 66 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSP430F5438A: Initialize Hardware at Main Memory Bootloader

MSP430F5438A: Can I interface an external programming flash?

Saira Shaikh
Prodigy 160 points
Part Number: MSP430F5438A
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

Greetings,

1. Can I interface an external SPI programming flash with this microcontroller? 
If yes, do you have any recommended ones?

2. Additionally, can I develop all the programs needed on CCS? or I'll need any other IDE to work with?

Thanks!

  • 0
    TI__Expert 4740 points

    Hi Saira,

    1. Sure, just find a flash that supporting standard SPI.

    2. Yes, you could finish most of you program work in CCS. BTW, for some mass production need, maybe Uniflash you will also needed.

    Best Regards,

    Pengfei

**Attention** This is a public forum