MSP430I2021: while programming microcontroller, it is giving error "Could not write device memory : (WriteMemory) , address=0x8000, buffer=, count=0x199a"

Devang Nayak

Part Number: MSP430I2021
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

We are using Texas device MSP-FET430UIF" for programming the MSP430i2021 and unable to program it. Error being shown is "Could not write device memory : (WriteMemory) , address=0x8000, buffer=, count=0x199a".

15 days ago

0 Xiaodong LI 10 days ago

TI__Mastermind 22585 points

Hi Devang Nayak

Could you please comment which PC sides software you used, it is CCS or uniflash?

Thanks

0 Devang Nayak 10 days ago in reply to Xiaodong LI

Prodigy 10 points

Hi Xiaodong LI

We are using FET-Pro430( FET MSP430 flash programmer ) tool at PC side for programming MSP430i2021. This programming issue occurred in 2 out of 5 microcontroller flash programming attempts tried.

Kind Regards,

Devang Nayak

0 Xiaodong LI 7 days ago in reply to Devang Nayak

TI__Mastermind 22585 points

Hi Devang Nayak

Which operations you have used? if the programming operation is failed, could you please try erase operation?

At the same time, could you please test with the program passed MSP430i2021 and the program failed MCU board to check if there is some issue on the board?

Thanks

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430I2021: while programming microcontroller, it is giving error "Could not write device memory : (WriteMemory) , address=0x8000, buffer=, count=0x199a"