Part Number: MSP430FR6047
Tool/software:

Hi,
I need to understand from where TX BIAs and RX Bias is generated,its Value and its significance and is it under my control through software or hardware.
Need to understand the same.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: MSP430FR6047
Tool/software:

Hi,
I need to understand from where TX BIAs and RX Bias is generated,its Value and its significance and is it under my control through software or hardware.
Need to understand the same.
Hi,
There is a TX/RX bias generator in the block diagram. You can set its value through registers shoed in the figure.

If you are using auto mode, you do not need to set it by yourself.
Best regards,
Cash Hao
**Attention** This is a public forum