Tool/software:
Team,
Refering to the datasheet and EVM schematics below:
-Could the PVCC decoupling capacitor be reduced?
-Is it possible to connect only a smaller portion of that capacitance directly to the PVCC pin, while the rest is connected via longer tracks?
This way, the remaining capacitance can be placed closer to other parts of the circuit that also require capacitors near their pins.
- Any advise you could give that would help to achieve it?
https://www.ti.com/lit/pdf/SLASEF5 
https://www.ti.com/lit/pdf/tidrys5
Thanks in advance,
Anber
