EVM430-FR6047: Firmware download file. Not on webpage suggested in user guide.

Richard Wilson1

Part Number: EVM430-FR6047
Other Parts Discussed in Thread: UNIFLASH, MSP430FR6047

Tool/software:

Hi I am trying to use the EVM430-FR6047. The user guide says to re-flash the processor on the Board :-

2. Install the latest water metering firmware, which can be downloaded from software-dl.ti.com/.../
msp430_public_sw/mcu/msp430/USSSWLib/USSSWLibWater/latest/index_FDS.html
3. Open Uniflash and select the MSP430FR6047 device.

But that page contains no firmware file to download. Can you provide a link ?

Many thanks Richard

5 months ago

0 Shailesh Thakurdesai 5 months ago

TI__Intellectual 1070 points

Sorry for this and the link appears to be broken. You can get the relevant software from this web link https://www.ti.com/tool/MSP-ULTRASONIC-DESIGN-CENTER,

0 Richard Wilson1 4 months ago in reply to Shailesh Thakurdesai

Prodigy 50 points

Hi,

I cannot find a bin/hex/image file there. I have downloaded the Uniflash programmer but cannot find any firmware file for the EVM430-FR6047. Can you give me an address for the specific file ?

Many thanks Richard

0 Shailesh Thakurdesai 4 months ago in reply to Richard Wilson1

TI__Intellectual 1070 points

https://dr-download.ti.com/secure/software-development/driver-or-library/MD-uH0yCTUaqe/02.40.00.00/USS-02_40_00_00-windows-installer.exe You will need a my.ti.com account.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

EVM430-FR6047: Firmware download file. Not on webpage suggested in user guide.