Dear Team
We are enabling the memory protection with MSP430FR2633IDAR uC. So when we want to reprogram, we use the following option in Uniflash SW as the interface gets locked.
But our production plan use the following SW for programming. How can we have similar feature implemented at their end so that they can reflash easily? Do you have any ideas? Kindly let us know
Thank you
Best Regards
Surabhi
Hi Surabhi,
The second image you attached does not appear on my side. Could you send it again?
An option that can be used for re-flashing could be to utilize the BSL:
Here is the MSP430 Flash Devices Bootloader (BSL) User's Guide for reference.
Best,
Owen
Hi Surabhi,
The MSP-GANG should be able to perform this function.
From the MSP Gang Programmer (MSP-GANG) User's Guide:
I would suggest referencing this document if they have any questions.
Furthermore, I would recommend using the C-GANG instead, as it is the newer production programmer.
Best,
Owen
**Attention** This is a public forum
