MSP430FR6045: Can i divide 8MHz signal and source it out through pin

Hi Harsh,

Please download the code example in the following link https://www.ti.com/product/MSP430FR6045#software-development, and you can find a clock output example as shown below in the SDK.

Best Regards,
Peter

Hi Peter i need to know 
If i can further divide this Frequency so i that i can measure it at much lower frequency
As currently i dont have setup to measure ppm error in 8MHz clock

Hi Harsh,

According to the code, you can divide it to a small frequency to the  SMCLK / ACLK and output to the pin, please refer to the chapter 3 in the User Guide for more details to modify the corresponding registers, also in the SDK we have provided examples to output the SMCLK / ACLK to the pin for reference.

Best Regards,
Peter

Hi,
Actually am referring to USS 8MHz clock 
Can this too be divided so i can measure it.

Hi Harsh,

Sorry for miss that, for the USS 8MHz may can not be divided further, as for the USS clock, refer to the below diagram in the TRM, it can notice that it only has two output USSXT_BOUT and PLL_CLK, USSXT_OUT which both cannot be further divided into a much more small frequency that you want.

Best Regards,
Peter