MSP430FR2676: C-GANG information

Ryuuichi machida

Part Number: MSP430FR2676
Other Parts Discussed in Thread: C-GANG

Hi,

Since it seems that following thread is closed, I re-open thread related to below.
MSP430FR2676: GANG with external power supply - MSP low-power microcontroller forum - MSP low-power microcontrollers - TI E2E support forums

I would like to confirm current status of C-GANG.
Please give your feedback for following contents from brian-san.

>There are still points being negotiated, and it's taking much longer than expected to close them out.

Best Regards,

1 month ago

0 Sal Ye 1 month ago

TI__Mastermind 32395 points

Hi Ryuuichi,

Unfortunately we have no update for this.

If you have MSP-GANG in your side, I think this one can still be used for MSP430 device mass production.

If you need C-GANG to program the MSP430 device series, I think right now users need use the legacy version (early version, like 2.96/2.98) to work with C-GANG.

B.R.

Sal

0 Ryuuichi machida 1 month ago in reply to Sal Ye

Guru 13505 points

Hi,

Thank you for sharing your situation.
>If you have MSP-GANG in your side, I think this one can still be used for MSP430 device mass production.
I have MSP-GANG but MSP-GANG ended up EOL. So we can no longer buy.

>Unfortunately we have no update for this.
Is negotiation making progress or pending ?

Best Regards,

0 Sal Ye 1 month ago in reply to Ryuuichi machida

TI__Mastermind 32395 points

Hi Tyuuichi,

Ryuuichi machida said:
Is negotiation making progress or pending ?

We are still under negotiation.

B.R.

Sal

**Attention** This is a public forum