• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 318 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F248 Debug PROBLEM

jedi_erdi
Prodigy 200 points


Hi,

While the msp430 was working on the debugger screen(CCE V3.1) an error message like below appeared:

""The CIO command cmd:(18) in the CIO buffer at address (0x18e8) was not recognized. Please check the device and program memory maps.""

and the device began not working properly.

What may cause that error?

**Attention** This is a public forum