MSP430 WOLVERINE development board

Hasan Baig

Other Parts Discussed in Thread: MSP-TS430RGZ48C, MSP430F5529, MSP-EXP430FR5969

Hi Everybody,

I need to know is there any development board available for MSP430 Wolverine series. If there is not so how can I start development with wolverine series.

Please let me know.

Thank you.

Regards

Hasan Baig

over 12 years ago

0 Chester Gillon over 12 years ago

Guru 92251 points

Hasan Baig said:
I need to know is there any development board available for MSP430 Wolverine series.

At the moment only appears to be the MSP-TS430RGZ48C - MSP430 48-pin FRAM Target Board (or MSP430 48-pin FRAM Developer's Kit which is a MSP-TS430RGZ48C plus MSP-FET430UIF)

0 old_cow_yellow over 12 years ago in reply to Chester Gillon

Guru 58965 points

Be aware that only one of the Wolverine series chips available now has 48 pins. All others (so far) do not use 48 pin packages.

0 Hasan Baig over 12 years ago in reply to Chester Gillon

Prodigy 20 points

Thanks for your reply.

The status of "MSP430 48-pin FRAM Developer's Kit" is PREVIEW and it is not in production yet. Also the features of this kit is not properly described like how many user LEDs or types of interfaces this kit have.

I am a beginner and wants to start directly working on MSP Wolverine series. I actually have to implement wireless sensor algorithm.

Can I start with any other development kit like (http://www.ti.com/tool/msp-exp430f5529) and later jump to Wolverine series?

How much time will be required to port the same algorithm (initially implemented on MSP430F5529 device) on to MSP430FR59XX (wolverine series) ?

Regards

Hasan

0 Chester Gillon over 12 years ago in reply to Hasan Baig

Guru 92251 points

Hasan Baig said:
Also the features of this kit is not properly described like how many user LEDs or types of interfaces this kit have.

MSP430(tm) Hardware Tools User's Guide (Rev. K) contains the circuit diagram and parts list for the MSP-TS430RGZ48C target board included in the kit. The target board is basic, with the pre-soldered items only containing a socket for the target device and a 14-pin header for the MSP-FET430UIF programmer.

0 Jason Work over 12 years ago in reply to Hasan Baig

TI__Genius 10830 points

Hasan Baig said:

Can I start with any other development kit like (http://www.ti.com/tool/msp-exp430f5529) and later jump to Wolverine series?

You can now find the upcoming MSP-EXP430FR5969 on digikey.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430 WOLVERINE development board