• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 79 subscribers
  • Views 363 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Job Opportunity - Heat Meter Development

Marco Faini
Prodigy 20 points
Other Parts Discussed in Thread: CC430F6137

Hello,

I am not sure if this post is against the forum's policy, I apologize in advance if it is. I have searched the guideline section but I have not found any restriction. I did find occasional job posts in the archives, so I am assuming this is allowed.

The HW/SW design company we hired 2 years ago has not been able to achieve anything. As of today, we have yet to perform a single successful test.

I am looking for HW/SW design expert or experts. Our solution is made of a heat meter, transceiver and a common PDA. Both heat meter and transceiver use CC430F6137 for bi-directional RF communication.

If you are interested, or if you know someone that might be, and you are a true expert on CC430 chip LPRF functionality, please let me know how I can get in touch with you or the company you work for.

Thank you

Marco

  • 0
    Guru 22270 points

    Two years and no results!  Maybe you should publish the name of the design company so that others will avoid them!

    Yes, this community forum does attract quite a few recruiters.  It is good to know that TI supports the Community by not disallowing companies that are looking for technical assistance outside the forums to post here.

    Hopefully you will have success with one of our members.

    Thanks TI!

  • 0
    Guru 35585 points

    Where are you based? A few details in you profile would help.

     See my profile for contact details...

  • 0 in reply to Andy Neil
    Prodigy 20 points

    Hello Andy,

    I live in Houston, TX. I am currently in Europe for few more days, for yet another useless test.

    I've added details and contact info on my profile.

    Thank you.

    Marco

**Attention** This is a public forum