• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 754 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-EZ430U debugging interface

Babak Hashemizadeh
Prodigy 20 points
Other Parts Discussed in Thread: CC430F5137

Hi all,

I was wondering if it is possible to program firmwares onto CC430F5137 MCUs using MSP-EZ430U debugging interface(using spy-bi-wire interface).
If yes what emulator should I use ?
P.S: I found below note at MSP-EZ430U user's guide,but still wondering if you could provide me more info.
Inline image 1
  • 0
    Prodigy 20 points

    My goal is using spy-bi-wire interface to program CC430F5137 MCU.(using 4-wire:test,rst,Vcc,Vss )

    I also have MSP430 USB-Debug-Interface  (MSP-FETU430IF),but still have problem using spy-bi-wire interface for programming.I am using Lite FET-Pro430 Elprotronic,and set it up for 2-wire JTAG with below pin configuration but it still needs standart JTAG configuration to load the file to MCU.

    Inline image 1

**Attention** This is a public forum