• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 78 subscribers
  • Views 586 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Рrogramming MSP430F149 using the programmer MSP-PRGS430

Alex Karmanov
Prodigy 10 points
Other Parts Discussed in Thread: MSP430F149

Hello. I am from Russia. My name is Alexander.
Prompt please. I have a Hex file, there is a controller MSP430F149
and programmer MSP-PRGS430.
After programming is an error "Communication failed" or "Erase check error at target address 0x1000".
What is my fault?

**Attention** This is a public forum