This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Need to use MSP430F53xx 64-Pin FET tool and target board combination for a prototype.
Can I get the schematic, photos and user guide for this item?
thanks
Hi,
the development kit schematic can be found in the Hardware Tools Users Guide:
It looks like the specific board for the MSP-FET430U64B "bundle" is the MSP-TS430RGC64B - schematic is in section B.19
Hopefully, that helps.
The zip file has the schematic, but no mechanical details.
I suppose I should buy one module and figure out the preliminary mechanical details from the GA drawing in B19 and do the final mechanical when I receive the item.
thanks,
Looking for a board smaller than TS430RGC64B for this processor. Is there a board with tiny debug connector, tiny I/O connectors, chip and very little else?
thanks,
Kalpak,
we have only FET boards for MSP430F53xx, and I am not aware of any third party solutions. You can find the available boards in "Tools and Software" section of the product web page. E.g. for MSP430F5342: http://www.ti.com/product/MSP430F5342/toolssoftware
**Attention** This is a public forum