MSP430F5529 Launchpad Access to P5.0

Jose Fco Balsa Gonzalez

Other Parts Discussed in Thread: MSP-EXP430F5529LP, MSP-TS430PN80USB

Hi I need to configure the external voltage reference for P5.0 (Vref) but I think that it's not accesible on the launchpad and we need to use a wire. Can you confirm me this??.

Many thanks

over 11 years ago

0 Leo Hendrawan over 11 years ago

TI__Guru 56650 points

Hi,

referring to the MSP-EXP430F5529LP schematic which can be found here: http://www.ti.com/lit/ug/slau533b/slau533b.pdf - chapter 6, it seems you are right that P5.0 is not accessible on the Launchpad.

You can try to use the MSP-TS430PN80USB instead if you need access to this pin: http://www.ti.com/tool/msp-ts430pn80usb

0 Jose Fco Balsa Gonzalez over 11 years ago in reply to Leo Hendrawan

Prodigy 120 points

Many thanks

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F5529 Launchpad Access to P5.0