MSP430F5438 Orcad Capture Symbol and PCB Footprint

Mohammadi Bharmal

Prodigy 115 points

Other Parts Discussed in Thread: MSP430F5438

Hi All,

Are the Orcad capture symbol of MSP430F5438IPZ and PCB footprint are available?

Regards,

Mohammadi Bharmal

over 15 years ago

0 Priya Thanigai over 15 years ago

TI__Mastermind 26380 points

Hello,

The PCB footprint is the standard TI PZ100 available on the packaging website: http://focus.ti.com/lit/ml/mtqf013a/mtqf013a.pdf

The OrCAD symbol has not been uploaded on the web yet. I can check this and re-post to the forum.

Regards,

Priya

0 Priya Thanigai over 15 years ago

TI__Mastermind 26380 points

Hello,

Please find attached the Eagle symbol for the F5438.

Regards,

Priya

sMSP430.lbr

0 rafi zachut over 15 years ago in reply to Priya Thanigai

Intellectual 480 points

Hello Priya,

Orcad does not support *.lbr files. Can you give Orcad library for MSP430F5438 ?

Thanks,

Rafi

0 Priya Thanigai over 15 years ago in reply to rafi zachut

TI__Mastermind 26380 points

Rafi,

Typically you can find this info in the "Symbols and Footprints" section of the product page (type the PNO in the search box in www.ti.com to get to the product page).

Though the F5438 product page does not have the Symbols attached; you can find 100PZ package footprint and symbols under the FG4619 product page.

Click on Footprints --> View (Footprints).

Thanks & Regards,

Priya

0 rafi zachut over 15 years ago in reply to Priya Thanigai

Intellectual 480 points

Thanks Priya,

This device pinout is not the same as F5438 (or BT5190). Do you have Orcad lib for them?

Thanks again,

Rafi

0 Frank Walker over 14 years ago in reply to rafi zachut

Prodigy 125 points

Who uses Eagle schematics? How about an OrCAD symbol? The question was asked 5 times!

0 sparkchaser over 14 years ago in reply to Frank Walker

Expert 1240 points

OrCAD Capture symbol, and Layout footprint:

8880.MSP430F5438.zip

These are provided freely to the engineering community, but I assume absolutely no responsibility for anything that anybody might do with them. Always double check everything received freely on the new before using them in your own design.

0 Frank Walker over 14 years ago in reply to sparkchaser

Prodigy 125 points

Thank you, Sparky.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F5438 Orcad Capture Symbol and PCB Footprint