Other Parts Discussed in Thread: MSP430F5151, MSP430G2553
Hello
I have to working on msp430f5151 controller. Till now i have work on MSP430G2553 launchpad. but now i have to use MSP430F5151. Now i am facing problem to load program in MSP430F5151.
How to do this?
Hi Pra,
The MSP430F5151 supports Spy-Bi-Wire, so you can use the ezFET tool on the Launchpads. Simply connect power, TST (called SBWTCK in the F5151 d/s), RST(named SBWTDIO), and ground lines from the ezFET on a Launchpad to the target MSP430F5151's lines.
This method works for MSP430s that support Spy-Bi-Wire. For all MSP430s, we have a JTAG development tool here: http://www.ti.com/tool/msp-fet
Set the target as an MSP430F5151 in your IDE and program like you would with the MSP430G2553.
Regards,
**Attention** This is a public forum
