CONFIGURE ADC 12 OF MSP430F5529

LALITA KUMAWAT

Prodigy 20 points

Other Parts Discussed in Thread: MSP430F5529, MSP430WARE

Hello

i just wanted to know that how can we configure adc12 of controller which i am using,i.e,MSP430F5529 ?

i tried many attempts but didn't get the desired output.

please help me in that.

thank you

over 11 years ago

0 Todd Anderson78572 over 11 years ago

Guru 14640 points

Pull down the latest MSP430ware, and look for this example:

C:\ti\msp430\MSP430ware_1_97_00_47\examples\devices\5xx_6xx\MSP430F55xx_Code_Examples\C\MSP430F55xx_adc_01.c

It will give you a good starting point. You may want to also check out the workshop:

http://processors.wiki.ti.com/index.php/Getting_Started_with_the_MSP430_LaunchPad_Workshop

Although it does not contain a specific example (yet) for the ADC, it will get you going...

0 LALITA KUMAWAT over 11 years ago in reply to Todd Anderson78572

Prodigy 20 points

thank you for your suggestion...

0 Jens-Michael Gross over 11 years ago

Guru 227245 points

How to configure the ADC12 depends on what you want to do with it. If there were only "the one configuration", then there would be no need to have a configurable ADC at all.

The sample Todd pointed you to might be useful for you or not at all. It completely depends on your intended application.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CONFIGURE ADC 12 OF MSP430F5529