• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 3998 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Can I program the msp430 microcontroller series, with a TIVA C series Launchpad?

Jorge Peirone
Prodigy 40 points
Other Parts Discussed in Thread: ENERGYTRACE, MSP-EXP430FR5969, MSP-FET

Hi I am George, I am beginner in the  microcontrollers area, and i would like know if  can i program the msp430 microcontroller series, with a TIVA C series Launchpad board?

something like this.

thx.

regards.

  • 0
    TI__Guru 69176 points

    Hi Jorge,

    Unfortunately, the Tiva C uses different emulation for programming than what is required by the MSP430. So you won't be able to use the Tiva Launchpad to program an MSP430. You would need an MSP430 programming tool like the MSP-FET, or an MSP430 Launchpad with the eZ-FET emulation like the MSP-EXP430FR5969. At least these tools also have some other cool features like EnergyTrace.

    Regards,

    Katie

  • 0
    Guru 27285 points

    Jorge Peirone said:
     if  can i program the msp430 microcontroller series, with a TIVA C series Launchpad board?

     Hi Jorge, your picture is a TIVA chip, so this is possible, remove VCC jumper to do this.

     MSP430 is JTAG too but ICDI is not supported nor other standard JTAG, programmer firmware is open source and if someone has a lot of time to waste it can be adapted to TIVA board and also my dream to TIVA129 to program MSP by network too.

**Attention** This is a public forum