MSP430F5529 Experimenter Board

Samuel Christopher

Other Parts Discussed in Thread: MSP430F5529, MSP-TS430PN80USB, MSP-EXP430F5529LP

Hi,

Actually i am loking for MSP430F5529 Experimenter board,with the link http://www.ti.com/tool/mspexp430f5529 its not available in TI. is it obsolete or provided any solution in replace of this .

over 10 years ago

Dennis Eichmann over 10 years ago

Guru 74080 points

Here it is:

http://www.ti.com/tool/msp-exp430f5529lp

Dennis

Samuel Christopher over 10 years ago in reply to Dennis Eichmann

Intellectual 375 points

Hi,

Thanks for the reply, but am looking for that specfic board to buy , can u provide the link , aside i know that MSP430F5529usb is there, but i need that specific board where all built in pheripherals are avaialble i require that can u provide me link ,n do needful

Dennis Eichmann over 10 years ago in reply to Samuel Christopher

Guru 74080 points

Is/was there another one?
Then sorry, I only know this one.

Dennis

Leo Bosch over 10 years ago in reply to Samuel Christopher

Guru 23000 points

Not sure what happens with the TI page, would be pity if it’s obsolete, but Mouser has the MSP-EXP430F5529 on stock.

Alternative the ‘MSP430F55xx USB 80-Pin Target board’ (MSP-TS430PN80USB) gives you also full control over the MSP430F5529. Only you need an additional JTAG FET to program.

Clemens Ladisch over 10 years ago in reply to Leo Bosch

Guru 303860 points

Actually, Mouser's website says "Stock: 0", and the estimated ship date of the on-order boards is … last week.
Farnell says "No Longer Manufactured".

I'm not able to look into TI's collective mind, but I guess that the experimenter board was not very successful compared to the LaunchPad, probably because the latter has more flexible connection options.

Leo Bosch over 10 years ago in reply to Clemens Ladisch

Guru 23000 points

Ooops, was a little note under it, 45 in order lead time 26 weeks!

MikeS over 10 years ago in reply to Leo Bosch

TI__Expert 7125 points

Hey Guys,

This is still an active tool - it isn't obsolete. We had a component on the board go EOL, and needed a redesign to continue manufacturing these boards. We should have stock in the TI Store in about 2 months or so, we (and all our distributors) are currently stocked out of this kit.

I am not sure why the website is down, we are looking into it. It should be back up soon. Sorry for the unfortunate timing.

If you need something sooner than 2 months from now, check out the 5529 LaunchPad or the 5529 target board (both mentioned above in the thread).

Leo Bosch over 10 years ago in reply to MikeS

Guru 23000 points

Mike, thanks for clarification.
Hopefully Mouser is wrong with his 26 weeks.

MikeS over 10 years ago in reply to Leo Bosch

TI__Expert 7125 points

The link is live again, please make sure you use the dashes in the part #, the actual link is:

http://www.ti.com/tool/msp-exp430f5529

HS FAE Germany over 10 years ago in reply to MikeS

TI__Mastermind 31730 points

Hello Mike,
yes, it is live again but you can't order it. I need the MSP-EXP430F5529 for mounting the CC2654MODN radio module. I can't do it with the MSP-EXP430F5529LP.

Regards, Holger

MikeS over 10 years ago in reply to HS FAE Germany

TI__Expert 7125 points

Holger,

As I said above- we won't have any of these available for another 2 months or so. We have no stock currently.

In the meantime please look at the EM board adapter for the LaunchPad below.

https://store.ti.com/boost-ccemadapter.aspx

Dan Ballard over 10 years ago in reply to MikeS

Intellectual 730 points

Thanks for the update.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F5529 Experimenter Board

http://www.ti.com/tool/msp-exp430f5529lp

http://www.ti.com/tool/msp-exp430f5529

https://store.ti.com/boost-ccemadapter.aspx