MSP430G23553 And IRremote

Roland ALAVO

Other Parts Discussed in Thread: MSP430G2553, ENERGIA

Hi! I'm using Energia to programme my microcrocontrolar MSP430G2553 and the IRremote Light. My probleme is on which pin can i to put a Ir led to transmit a IrCode. All that I find is how to do with Arduino(PIN 3) Help me please

over 11 years ago

0 Ryan Brown1 over 11 years ago

TI__Guru**** 223427 points

Hello Roland,

Pin P2.3 is used to output the IR PWM signal, at least for the case of Energia's IRremote library. If not already using them I would highly recommend looking into the IRremote examples, which can be accessed in the Energia IDE under File -> Examples -> IRremote. Here's a forum thread from 43oh discussing how to get started with the IRremote library: forum.43oh.com/.../2552-irremote

Happy coding,
Ryan

0 old_cow_yellow over 11 years ago in reply to Ryan Brown1

Guru 58965 points

Another E2E member did both transmit and receive without using Energia.

e2e.ti.com/.../421372

0 GoNavy over 10 years ago in reply to old_cow_yellow

Prodigy 40 points

Are there any examples transmitting IR using NEC protocol with the MSP430g2553 MCU in CCS? I have my 6 button interrupts coded, however, stuck on how to send the IR signals... any suggestions?

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430G23553 And IRremote