Hi All,
i am able to read/transmit AC IR data of any key but after learning any key (e.g - Temp+), temp is not increasing if i am pressing this key again.
please provide a solution to solve this issue.
Thanks in advance.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi All,
i am able to read/transmit AC IR data of any key but after learning any key (e.g - Temp+), temp is not increasing if i am pressing this key again.
please provide a solution to solve this issue.
Thanks in advance.
Hi Venkatesh,
What do you mean by "AC IR"? Does "AC" mean air conditioner?
For most air conditioner, the IR code is different every time even you press the same key.
If you want to use that example code, you need to make sure only one IR code for each key.
Regards,
Darren
Hi All,
Thanks Darren, for such a useful information about "AIR CONDITIONER" remote.
But how to achieve "AIR CONDITIONER" remote functionality as like original remote, means i want to transmit multiple temperature values from single key.
Regards,
Venkatesh
Hi Venkatesh,
I do not know any reference material. For the provided demo code "IR_Learning_Mode", you can try it with TV.
Regards,
Darren
**Attention** This is a public forum