• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 784 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

emeter-fir-table.c Calibration

Skip Rye1
Prodigy 140 points
Other Parts Discussed in Thread: MSP430F6779

I would like to know if TI has a procedure on how to calibrate the fir_coeffs table in emeter-fir-table.c ?

3-ph emeter, 240V based on MSP430F6779

www.ti.com/.../EVM430-F6779

**Attention** This is a public forum