TI development boards supported by Parse cloud

Neeraj mishra

Other Parts Discussed in Thread: CC3200, MSP430F5529

I was going through parse website :- parse.com/apps/quickstart#embedded and I came to know that CC3200 development board is supported by it. Is it only this board which can be used to upload data on parse cloud or others boards are there? If there is any other board or any other technique to do please tell me.

over 10 years ago

0 Markel Robregado over 10 years ago

Guru 86755 points

Hi Neeraj,

As long as your TI Launchpad can connect to the internet, you can upload data to Parse. You need to incorporate Parse SDK to your program.

I made a blog post about Parse quickstart and CC3200. See, my blog link at my signature.

- kel

0 Neeraj mishra over 10 years ago in reply to Markel Robregado

Prodigy 60 points

Hi Markel,

Thank you so much for your reply. It is really a great help. I have a MSP430F5529 launchpad and a esp8266 wifi module. So I can use PARSE right? Please correct me if I am wrong.

I was searching through some website and I want to ask you one more question that PARSE also supports ARDUINO ZERO board, but that is expensive for my project. So similar to TI is it possible to connect ARDUINO UNO board and esp8266 wifi module to update data on PARSE.

Thank You

0 Markel Robregado over 10 years ago in reply to Neeraj mishra

Guru 86755 points

Neeraj mishra said:
Thank you so much for your reply. It is really a great help. I have a MSP430F5529 launchpad and a esp8266 wifi module. So I can use PARSE right? Please correct me if I am wrong.

Yes, using PARSE SDK.

Neeraj mishra said:
I was searching through some website and I want to ask you one more question that PARSE also supports ARDUINO ZERO board, but that is expensive for my project. So similar to TI is it possible to connect ARDUINO UNO board and esp8266 wifi module to update data on PARSE.

I would recommend that you use TI CC3200 Launchpad instead.

- kel

0 Neeraj mishra over 10 years ago in reply to Markel Robregado

Prodigy 60 points

Can you guide to how to use PARSE SDK of my MSP430F5529 launchad, because all what I am seeing in the site is that how to use CC3200.
Please help me.
Thank You

0 Markel Robregado over 10 years ago in reply to Neeraj mishra

Guru 86755 points

Hi Neeraj,

I am not very knowledgeable with the use of MSP430F5529 launchpad + esp8266 wifi module. So, I can't give expert advice regarding that.

- kel

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

TI development boards supported by Parse cloud