MSP432 + RTC

Christoph Marko

Other Parts Discussed in Thread: ENERGIA

Hi guys,

For my datalogger project, I used the RTC Energia Library embeddedcomputing.weebly.com/date-and-time-library.html.

For my programm I want to write the data, which are written on the Serial communication, on my SD Card with a sprintf() function.

But when I tried to write the data, I get the error that the stringDataTime(myEpochRTC) couldn't converted to String.

Does anybody know how to deal with that?

LG,

Chris

over 9 years ago

Ryan Brown1 over 9 years ago

TI__Guru**** 212407 points

Hi Chris,

You have to first use the function convertEpoch2Structure to convert myEpochRTC to a time_t value that can then be converted to a String. This is based on the following example code: github.com/.../CC3200_NTP.ino

FYI sometimes Energia-specific questions are best asked on the 43oh Energia forum: forum.43oh.com/.../

I know that the author of this library, Rei Vilo, has been quite active on the 43oh forum in the past.

Regards,
Ryan

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432 + RTC